Floor Repair in Virginia

Board replacement, loose tile resets, squeak fixes from above and small patches that let a good floor keep going.

Book a measure

Gloved hands holding a matching reclaimed pine board over a neat gap cut into an old heart pine hallway floor

About this service

Not every floor needs to be replaced. Often a hall or a kitchen is in good shape except for a few boards that split, a tile that cracked under a dropped pan, or a spot that squeaks every time someone walks to the kitchen. A careful repair fixes the problem and keeps the floor you already like.

For wood floors we cut out the damaged boards, find or mill matching pieces, and lace them into the surrounding floor so the joints stay staggered. For tile we remove the cracked piece, clean out the old thinset and grout, set a new tile and grout it to match. Squeaks in wood floors are quieted from above with trim head fasteners set and filled at the surface.

Repairs are also a smart first step before refinishing. Swapping a few boards before sanding means the new wood is sanded and coated along with the rest, so the patch blends in with the whole floor.

Older houses often hide a few spare boards in a closet, an attic or under a later floor, and those are the closest match you can find. Before we source new or reclaimed pieces, we ask you to look, and we check the closets on the visit. A good match in width, grain and age makes the repair almost impossible to spot once it is finished.

How the four stages run

  1. Measure

    We look at the problem spots, check the boards or tiles around them and talk about matching pieces.

  2. Prepare

    Furniture is moved, the area is protected, and matching boards or tiles are sourced and rested.

  3. Install

    Damaged pieces come out, new ones are fitted and fastened, and squeaks are quieted from above.

  4. Finish

    New boards are blended with stain or finish where needed and grout is matched on tile repairs.

Good to know

  • Repairs blend in most when paired with refinishing
  • Keep a spare box of tile after any new install
  • Squeak fixes are done from the floor surface
  • Reclaimed boards help match older floors

Questions people ask

Can you match old boards in a 1920s house?

Often, yes. Common species and strip widths from that era are still made, and reclaimed boards help with color and patina. We show you the match before we fit it.

Will a single new board stand out?

On a prefinished floor, a careful color match usually blends well. On an older floor, the closest blend comes from refinishing the room after the repair, so old and new wood get the same finish.

Can you fix a squeak without pulling up the floor?

Most squeaks come from a board rubbing against a nail or its neighbor. We fasten it down from the top with small trim head fasteners, then fill and touch up the surface.

Do you repair carpet?

We can restretch carpet that has rippled, fix seams that opened, and patch small spots with an offcut from a closet. For a worn out room, new carpet is usually the better plan.

Planning floor repair?

Send the rooms and a few words about the floor today. We set up a measure and put the plan in writing.